Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 10 hours
Every 50 hours
Every 200 hours
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Greasing and Lubrication
Lubricate the machine every 50 hours. Grease more
frequently when operating conditions are extremely
dusty or sandy.
Grease Type: General-purpose grease
How to Grease
Service Interval: Every 50 hours
1.
Disengage the PTO and engage the parking
brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Clean the grease fittings with a rag. Make sure
to scrape any paint off the front of the fitting(s).
4.
Connect a grease gun to the fitting. Pump
grease into the fittings until grease begins to
ooze out of the bearings.
5.
Wipe up any excess grease.
Where to Add Grease
Grease the locations indicated in
Maintenance Procedure
• Torque the frame mounting bolts.
• Torque wheel lug nuts.
• Lubricate grease fittings
• Torque wheel lug nuts.
Figure
15.
1. Grease locations
Grease the PTO shaft
1. Gearbox
11
Figure 15
(Figure
16).
Figure 16
2. PTO shaft end yoke
g016067
g015519
Advertisement
Table of Contents
