Battery Replacement - Stern Engineering Green Time 225910 Installation And Maintenance Manual

BaTTERY REPlacEMENT

To replace the battery in Green Time:
1) turn off the shut off valve.
2) Remove the faucet cover with the supplied allen key.
3) Release the screw and remove the cover.
4) disconnect the connector coming from the faucet cover to the battery.
5) Replace the used battery with a new 9V battery. a lithium battery is
recommended.
6) carefully place the new battery inside the body and reassemble the faucet cover
to the battery.
7) In order to avoid entering into the adjusting mode, wait 10 seconds before you
will operate the system.
Important:
- since water contacting the battery terminals rapidly drains the battery, do not
allow moisture or water into the system while the battery is being replaced.
- Make sure the o-ring is still in its groove and is not damaged. If needed
replace it with a new one if needed or clean and lubricate it with silicon grease
before reassembling the parts.
To replace the battery in Green Time b, Green Time 1000 b:
1. carefully open the battery box.
2. Remove the old battery.
3. Replace the used battery with a new 9V battery. a lithium battery is recommended.
4. close the box.
5. In order to avoid entering into the adjusting mode, wait 10 seconds before you will
operate the system.
9