auna iTuner 320 ME User Manual page 70

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 45
EN
70
The first two alarms are similar to the normal alarm. Turn the power on,
set the current time, and then set how often the alarm should ring. You
can choose between "daily", "once" and "on specific weekdays".
Set the corresponding values by turning the volume control or pressing
the buttons
to the next input field. Press the OK button on the remote control or the
volume control to confirm.
Set the desired alarm tone. You can choose between beep, melody and
Internet radio (DAB/ FM/ USB).
Once an alarm is set, the icon
current time.
Note: If you have selected "Internet Radio" (DAB/ FM/ USB) as the alarm
tone, a favourite stored station will be played. Only the same station can
be set for Alarm 1 and Alarm 2. Once the set alarm time is reached and
the alarm tone is "Internet Radio", the unit will connect to the Internet if
the network is available. Therefore there may be a short delay between
the set alarm time and the actual playing of the radio station. If no
network connection is available at that time, the unit will automatically
switch to "Melody". If you have activated the NAP alarm, the alarm
will ring every 5/ 10/ 20/ 30/ 60/ 90/ 120 minutes, depending on your
setting.
To adjust the alarm volume, select "Alarm Volume".
Once the alarm(s) has/have been set, the alarm icon will be displayed
at the bottom of the screen. The alarm icon with time display is also
displayed on the screen in standby mode.
To stop the alarm, press the standby button. To activate the snooze
mode, press the SLEEP button on the unit or the button
remote control. The alarm will sound again after only 5 minutes.
on the remote control. Press the button
appears on the screen next to the
, to move
on the

Advertisement

Table of Contents
loading

This manual is also suitable for:

10035110

Table of Contents