Moulinex VOLUPTA Manual page 31

!
The lid should only be fitted if the sealing ring is placed on the seal-mounting cup (Fig.
19) and if the self-mounting cup is fixed to the motor-unit lid.
• Switching on
1. Select the desired automatic programme
(B1, B2, B3,
pressing on the
(Fig. 9). To select the different sub-
programmes, press the programme button again
to scroll through the sub-programmes (e.g:
soup P1 = 1 press; soup P2 = 2 presses etc.).
2. Press the start/stop/reset button (B9) to
launch the programme (Fig. 10).
The appliance only starts if the jug is correctly
positioned on the base and if the motor-unit lid
assembly is correctly positioned on the jug.
In the event of incorrect positioning of the
jug or poor locking of the lid, the control
panel will flash when you try to launch a
programme (Fig. 11).
B4, B5, B7)
by
corresponding button
Disassembling the lid:
1. Unlock the lid assembly, by turning the lid in
an anti-clockwise direction so as to bring the
open padlock opposite the handle (Fig. 22).
2. Lift the lid with one hand and with the other
pull the cup to separate it from the motor
unit (Fig. 18).
3. Remove the sealing ring (Fig. 19).
24
EN