Advertisement
ADDITIONAL FEATURES
Holiday
To temporarily turn your heating off whilst you are on holiday, select the holiday function in the
Mode
menu and use the dial and buttons to set the number of days.
Support
Provides information for your installer or technical expert about your Halo such as software
Page
version and wireless signal strength.
To lock the control to avoid it being altered press and hold the left and right hand buttons at the
Child Lock
same time until the icon appears. To remove child lock press and hold the left and right hand
buttons again.
If the date and time seen across the top of the screen is incorrect you can alter this in the date
Date & Time
and time section of the menu.
Advanced
The advanced settings section of the menu allows your installer or a technical expert to make
Settings
adjustments and find information about your Halo.
If there is a fault then the fault symbol
Fault
Notification
hand button to access further information about the fault.
Name
Flame
Fault
Child lock
Override
Optimised
O
P
start
Delayed
D S
start
Optimised
stop
O
P
Frost
protection
Service due
Explanation
Indicates your heating is on
Indicates there is a fault with
the boiler
Childlock is set so the Halo
cannot be altered
Override or plus hours
function is active
Optimised start is active
Delayed start is active
Optimised stop is active
Frost protection is active
Service due in:
- 60 days (grey)
- 30 days (amber)
- 0 days (red)
will show on the home screen of your Halo. Press the left
Name
Hi
Lo
Target Temp
Current
Temp
Time
Date
Battery
Zigbee
Cloud*
Explanation
Room temperature is above
40°C
Room temperature is below
0°C
Temperature you want your
heating to reach
Room temperature in the
location of your Halo
Current time
Current date
Battery status indication
Indicates that the Halo is
communicating with the Smart
Interface
Indicates that the Halo is
communicating with internet
and can be controlled with the
Halo app via your smart phone
*Halo Combi Wi-Fi only
Advertisement
