About This Manual - Kemper KHS CoolFlow Maintenance Instructions Manual

EN
Table of contents
About this manual
Safety instructions
1 Before starting maintenance
2 Visual inspection & function test
3 Check valve
4 After maintenance
Manufacturer's address
Gebr. Kemper GmbH + Co. KG
Harkortstraße 5
D-57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-olpe.de
After-sales service
Service-Hotline
Tel.: +49 2761 891 800
E-mail: anwendungstechnik@kemper-olpe.de

About this manual

Read this maintenance manual carefully before starting any
maintenance work and follow the instructions! Also observe the
instructions in the separate installation and operating manual
and service manual provided.
Always pass on the manual to the current system owner and
keep it in a safe place for future reference!
Illustrations in this manual serve for a basic understanding and
may differ from the actual system configuration.
This manual is protected by copyright. Copyright lies with the
manufacturer.
Target group
This manual is intended for plumbing specialists and the system
owner. Maintenance of the system may only be carried out by
plumbing specialists who have been additionally trained in the
field of electrical installation.
Liability
The manufacturer assumes no warranty or liability in the event
of:
• Failure to observe the instructions in this manual.
• Incorrect installation and/or operation.
• Unauthorised modification of the product.
• Other improper methods of operation.
8 / 32 - K410061001000-00 / 02.2020 - © www.kemper-olpe.de
About this manual
Information on maintenance
8
Regular maintenance of the system is necessary in order to
9
maintain the safety and functionality of the system. Give priority,
10
however, to national and regional standards and regulations on
11 plumbing installation and maintenance.
12
Malfunctions due to a lack of or incorrect maintenance are not
13
covered by the warranty. You can also have the commissioning
and maintenance of the system carried out by Kemper, on
request.
Maintenance intervals
The cold water chiller must be serviced 1x a year according to
the manufacturer's instructions. Observe also the requirements
stipulated in DIN EN 806-5.
Safety instructions
Be sure to read and follow the safety instructions in this manual.
Failure to follow the safety instructions can result in injury or
even death and in damage to property.
Safety instructions are identified by symbols. The safety
instructions are introduced by signal words that express the
extent of the hazard.
The following safety instructions are used in this manual:
Danger!
Indicates hazards that might result in severe or
fatal injury.
Warning!
Indicates hazards
that may result in injury, material damage or
contamination of the drinking water
.
Note!
Indicates hazards that may result in damage to
the system or malfunctions.
Information
Indicates additional information and tips.
Obligations of the system owner
The system owner is the person who employs the cold water
cooler commercially. The system owner must ensure the safe
operation and proper condition of the system.
Danger of fatal electric shock!