3M 3829 Instructions For The Assembly

Mdr hand tool kit, plug connector 101xx-6000xx series onto 3m round jacketed discrete wire cable 3600 or 3644 series

Download this manual

MDR Hand Tool Kit 3829

Instructions for the assembly of 3M™ Plug Connector

101XX-6000XX Series onto 3M Round Jacketed

Discrete Wire Cable 3600 or 3644 Series.

All items shown below are included in the basic unit

of the 3M MDR Hand Tool Kit 3829,

stock number FE-5100-0088-1.

3M™ Cover Stops

3M™ Cutting Unit 3829-05

P/N FE-5100-3869-1

3M™ Fixture

Unit 3829-02

P/N FE-5100-3866-7

Hex Key

Slotted Cover

3M™ Bench Clamp 3829-01

P/N FE-5100-3865-9

3M™ Gauge Block

3M MDR Plug Connector 101XX-6000XX

Cover

3M™ Replacement Blades 3828

P/N FE-5100-1155-7

3M™ Hand Press 3829

3M™ Platen 3829-04

P/N FE-5100-3868-3

3M™ Locator Plate 3829-03

P/N FE-5100-3867-5

Connector Body

Page 1 101XX-6000XX Series onto 3M Round Jacketed Discrete Wire Cable 3600 or 3644 Series. All items shown below are included in the basic unit of the 3M MDR Hand Tool Kit 3829, stock number FE-5100-0088-1. 3M™ Replacement Blades 3828 3M™ Cover Stops P/N FE-5100-1155-7 3M™...
Page 2 3M™ MDR Hand Tool 3829 set-up Mounting area for 3M™ Cutting Unit 3829-05 and 3M™ Platen 3829-04. Mount the 3M™ Hand Press to a bench using the 3M™ Bench Clamp. Mounting area for 3M™ Fixture Unit 3829-02 and 3M™ Locator Plate 3829-03.
Page 3 Place wires over and through cover slots and into slots of 3M™ Fixture Unit 3829-03 with a pulling-down motion to hold wire in place. Install 3M™ Cutting Unit 3829-05. Push it in until it stops. Place 2 cover on top of 3M™ Slotted Cover Assembly.
Page 4 This product will be free from defects in material and manufacturer for 3M’s products are based on information believed to be reliable, but the periods of one (1) year from date of purchase. 3M MAKES NO OTHER accuracy or completeness is not guaranteed. Before using this product,...