Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for 3M 980
Summary of Contents for 3M 980
- Page 1 Ionized Air Gun 980/980E ™ User’s Guide...
-
Page 2: Table Of Contents
Index Section Page 1. General Description ..................3 2. Performance ....................3 3. Power Requirements ..................3 4. Air Supply Requirements ................4 5. Installation ....................4 6. Assembling the Components ................ 5 7. Operation ...................... 6 8. Maintenance ....................7 9. -
Page 3: General Description
ESD-safe. 2.0 Performance The Ionized Air Gun 980 helps reduce a static charge of ± 1000V to ± 100V in less than 1 second at a distance of 6 inches (15 cm) and 30 psi (2 bars) inlet pressure when tested in accordance with the ESD Association ionization standard ANSI/ESD-S3.1. -
Page 4: Air Supply Requirements
Please note that the failure to use clean, dry air or nitrogen may result in damage to the Ionized Air Gun 980 that will not be covered by warranty. 5.0 Installation Choose a location convenient to the work area and to the air supply. -
Page 5: Assembling The Components
5.3 Non-permanent Mounting Use 3M ™ Dual Lock Fastener Strips or pads to attach the console to a flat surface. 5.4 Mounting onto an Air Supply When an air supply is close to the work area and fitted with a U.S.- standard industrial interchange quick coupling, you can attach the console to the air supply fitting directly using the female quick coupler provided with the console. -
Page 6: Operation
4.0. 7.0 Operation WARNING The 3M Ionized Air Gun 980/980E is NOT for use in hazardous environments where the possiblity of ™ explosion exists. 7.1 Make sure the Power Switch on the top of the console is in the OFF position. -
Page 7: Maintenance
Release the trigger when the surface is assumed to be clean. 7.6 If the Ionized Air Gun 980 is not in use, it is recommended that the Power Switch on the console be turned off. This will avoid unintentional operation of the Ionized Air Gun 980. - Page 8 Sec. 6.0. 8.3 Replacing the Emitter Points The emitter points, built into the plastic tip of the Ionized Air Gun 980, usually last the life of the unit. However, the tip should be replaced if it is broken, or if the points are bent, broken, otherwise damaged, or if you are unable to remove dirt by cleaning the points with isopropyl alcohol.
- Page 9 8.35 Align the blunt prongs of the emitters with the holes in the 3M Ionized Air Gun 980 ™ barrel and set the clip into place. 8.36 Press the clip all the way in using the tip of a screwdriver. It should fit snugly between the raised rim of the barrel and the raised rim of the air nozzle.
-
Page 10: Specifications
8.4 Replacement & Optional Parts Table 1 lists the replacement parts and optional parts available for the 3M ™ Ionized Air Gun 980/980E. 8.5 Testing for Proper Operation 8.51 To make sure that your 3M Ionized Air Gun 980 is working properly, ™... -
Page 11: Package Contents
8.5" L x 3.0" W x 1.6" D (21.6 cm L x 7.6 cm W x 4.1 cm D) Weight 11.5 oz (326 g) 9.4 Transformer Input Ionized Air Gun 980: 120VAC (960/980X) 60 Hz 410A ™ Ionized Air Gun 980E: 230VAC (980E-X) 50 Hz 250mA ™ Output Power... - Page 12 EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M. WEEE Statement...
- Page 13 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
- Page 14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: 980E-X...