Yamaha DPX-830 Owner's Manual page 28

2. SETUP menu
TV60
SETUP
SCREEN ASPECT
VERTICAL
LOCATION
LAMP MODE
CINEMA
AUTO POWER
ON
AUTO POWER
OFF
SPLASH
SCREEN
HIDE SCREEN
COLOR
LOCATION FRONT/TABLE
TRIGGER OUT
TEST PATTERN CROSS HATCH
ITEM SETTING
SCREEN ASPECT 16:9, 4:3
VERTICAL ± 26
LOCATION
LAMP MODE STANDARD
CINEMA
AUTO POWER ON ON, OFF
AUTO POWER OFF, 5 – 60min
OFF
SPLASH ON, OFF
SCREEN
HIDE SCREEN BLUE, BLACK
COLOR
LOCATION FRONT/TABLE
REAR/TABLE
FRONT/CEILING
REAR/CEILING
TRIGGER OUT ON, OFF
TEST PATTERN
CROSS HATCH
WHITE
BLACK
• Do not change the setting of the LAMP MODE frequently. This could damage the lamp.
• To exit from the TEST PATTERN, press any buttons on the remote control.
24
16:9
0
OFF
OFF
ON
BLUE
OFF
FUNCTION
Use to select the screen size.
Use to adjust the position (height) of the projected image.
Select when using the projector in a bright environment.
Select to moderate the intensity of the lamp. The operating sound is reduced and the lamp
lifetime becomes longer.
When ON is selected, the lamp is automatically lit when the power cord is plugged in the
wall outlet. Select ON when using the projector mounted on the ceiling.
Use to set the time elapsed before the projector enters the stand-by mode when there is no
signal input from the source.
Select ON to display the splash screen when the power is turned on
Use to select the backbround when there is no signal inputted from the selected source.
Select when viewing images from the front with the projector installed on the floor.
Select when viewing images projected from behind of the screen with the projector installed
on the floor.
Select when viewing images from the front with the projector installed on the ceiling.
Select when viewing images projected from behind of the screen with the projector installed
on the ceiling.
Selec ON when there is a signal received at the TRIGGER OUT terminal
Select to display the test cross hatched pattern.
Select to display the maximum brightness image.
Select to display the minimum brightness image.