Using The Remote Control; Operational Range; Reception Angle - Yamaha DPX-830 Owner's Manual

3

Using the remote control

◆ Operational range

Front panel
30˚ 30˚
ON POWER STANDBY
ASPECT
AUTO ASPECT HIDE
NORMAL SQUEEZ S. ZOOM
HDMI COMP. VIDEO
INPUT
D-SUB S-VIDEO
ENTER
MENU KEYSTN
MEMORY
1 2 3
CONT. BRIGHT C.TEMP
GAMMA SHARP IRIS
SETTING
RDP-81

◆ Reception angle

Vertical directions
Vertical directions (ceiling mount)
Operate the remote control within a distance of 10 m from the
projector, pointing the light beam at the remote control sensor (front
Rear panel
or rear) of the projector.
AC IN
30˚ 30˚
ON POWER STANDBY
ASPECT
AUTO ASPECT HIDE
NORMAL SQUEEZ S. ZOOM
HDMI COMP. VIDEO
INPUT
D-SUB S-VIDEO
ENTER
MENU KEYSTN
MEMORY
1 2 3
CONT. BRIGHT C.TEMP
GAMMA SHARP IRIS
SETTING
RDP-81
When operating the remote control, keep the distance from the remote
control to the projector via the screen within about 5 m. The operable
range of the remote control, however, depends on the characteristics
of the screen.
20˚
10˚
20 20˚
Distance to sensor
10 m
(approximate value)
Caution
• Keep the remote control sensor out of direct sunlight or
fluorescent lamp light.
• Keep the remote control sensor at least 2 m away from
fluorescent lamps. Otherwise, the remote control may
malfunction.
• If there is an inverter-operated fluorescent lamp near the
remote control, the remote control operation may become
unstable. On this occasion, stick a commercially available
protection sticker on one of the sensors that is closer to
the fluorescent lamp.
20˚
10˚
20 20˚
Angle to sensor
30° left and right
(approximate value)
7