Table of Contents
Advertisement
SATURATION
HUE
SHARPNESS
PROGRESSIVE MODE
COLOR SYSTEM
SET UP LEVEL
SCART INPUT
HORIZ. POSITION
VERT. POSITION
PHASE
TRACKING
OVER SCAN
D-SUB INPUT
SYNC NOISE MASK
CLAMP POSITION
CLAMP WIDTH
LPF
How to set the menus
Following describe how to set AUTO POWER OFF time as an
example.
1. Press the MENU button.
• If no signal is input, the menu does not appear.
TV60
IMAGE
2. Press the
or
button to select a menu to use.
• SETUP menu is selected in this example.
TV60
SETUP
3. Press the ENTER button (or
TV60
SETUP
SCREEN ASPECT
16:9
VERTICAL
LOCATION
LAMP MODE
CINEMA
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
22
Unavailable when the input source is HDMI or D-SUB source is an RGB signal.
Available only when the VIDEO or S-VIDEO source is NTSC or 4.43NTSC signal.
Unavailable when the D-SUB or HDMI source is a computer signal.
Available only when the input signal is TV50, TV60, 480i or 576i.
Available only when the input source is VIDEO or S-VIDEO.
Unavailable when the input source is HDMI, and also when the D-SUB source is a computer signal.
Available only when the input source is D-SUB.
Unavailable when the input source is HDMI.
Unavailable when the input source is HDMI.
Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
Available only when the D-SUB source is a computer signal.
Unavailable when the VIDEO or S-VIDEO source is NTSC, 4.43NTSC, PAL-M, PAL-60 signal.
Available only when the input source is D-SUB except RGBCs (576i) signal.
Available when the input source is COMPONENT 720p, 1080i signal and D-SUB 720p, 1080i computer
signal.
Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
Available only when the COMPONENT or D-SUB source is a 480i/p, 576i/p signal, except RGBCs (576i)
signal.
button).
0
4. Press the
or
button to select an item to adjust.
AUTO POWER ON
OFF
AUTO POWER
OFF
OFF
SPLASH
ON
SCREEN
5. Set the selected item by pressing the
AUTO POWER
OFF
ON
AUTO POWER
30 min
OFF
SPLASH
ON
SCREEN
To exit from the menu:
6. Press the MENU button several times.
Important
• If the MENU button does not function, unplug the
power cable from the wall outlet. Wait about 10
minutes, plug the power cable in, and try again.
or
button.
Advertisement
Table of Contents
