Table of Contents
Advertisement
Solid Element Surface Units
Burn and Electrical
Shock Hazard
Solid element
surface
units do not glow red when hot. Make sure all
controls
are OFF and the range
is COOL before
cleaning.
Failure to do so
can result in burns or electrical
shock.
1.
Turn off all surface units.
2. For best results, wipe off surface
units with a damp
soft cloth and
soapy
water after each use.
Burned-on
food may be removed
with a soapy
scouring
pad. The
red spot in the center of the sur-
face unit will gradually
wash off.
This is normal
and will not affect
the operation
of the surface
unit,
3. IMPORTANT: After cleaning,
apply
a thin coat of salt-free oil to
the CCCL surface units, then heat
3-5 minutes. It may still smoke
slightly when heated.
If surface
units have dark spots caused
by
grease
and food, the oil treatment
will improve
their appearance
but not eliminate
the spots. NOTE:
Optional
Electrol@ dressing
can
be applied
to the surface
units
to improve
their appearance.
16
4. The stainless steel trim rings will
gradually
yellow
from the heat of
the surface units and pans. This is
normal.
The yellowing
can be
removed
by using stainless steel
cleaner
or Cook Top Polishing
Creme on the trim rings.
To obtain
order information
for
Cook Top Polishing Creme (Part
No. 814009) or Electrols dressing
(Part No. 814030), write to:
Whirlpool
Corporation
Attention:
Customer
Service
Dept.
1900 Whirlpool
Drive
LaPorte, IN 46305
Advertisement
Table of Contents
