Table of Contents
Advertisement
Solid Element Sur
e Units
I
I
3. IMPORTANT: After cleaning,
apply
a thin coat of salt-free oil to the
CCCL surface
units, then heat 3-5
minutes. It may still smoke slightly
when heated.
If surface
units have
dark spots caused
by grease
and
food, the oil treatment
will improve
their appearance
but not elimi-
nate the spots. NOTE: Optlonal
Electrol
dresslng
can be applied
to the surface
unlts to improve
thelr appearance.
i
units with a damp
soft cloth and
soapy
water after each use.
Burned-on
food may be removed
with a soapy
scouring
pad. The
red spot in the center of the sur-
face unit will gradually
wash off.
This is normal
and will not affect
the operation
of the surface
unit.
4. The stainless steel trim rings will
gradually
yellow
from the heat of
the surface units and pans. This is
normal.
The yellowing
can be
removed
by using stainless steel
cleaner
or Cook Top Polishing
Creme on the trim rings.
To obtain
order information
for Cook Top Polishing
Creme
(PN 814009) or Electrol dressing
(PN 814030), write to:
Whirlpool
Corporation
Attention:
Customer
Service
Dept.
1900 Whirlpool
Drive
LaPorte, IN 46305
Advertisement
Table of Contents
