Palm-Rest And Keyboard Assembly; Removing The Palm-Rest And Keyboard Assembly - Uma - Dell Vostro 5401 Service Manual

Next steps
1. Install the display assembly.
2. Install the memory module.
3. Install the heat sink -
4. Install the system fan.
5. Install the WLAN card.
6. Install the M.2 2230 solid-state
7. Install the M.2 2280 solid-state
8. Install the battery.
9. Install the base cover.
10. Follow the procedure in

Palm-rest and keyboard assembly

Removing the palm-rest and keyboard assembly - UMA

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
3. Remove the battery (3-cell
4. Remove the WLAN card.
5. Remove the memory module.
6. Remove the M.2 2280
7. Remove the M.2 2230
8. Remove the system fan.
9. Remove the speaker (3-cell battery configuration
10. Remove the heat sink.
11. Remove the coin-cell
12. Remove the I/O board.
13. Remove the power button with fingerprint
14. Remove the DC-in port.
15. Remove the touchpad.
16. Remove the display assembly.
17. Remove the system board.
NOTE: The system board can be removed along with the heat sink.
About this task
The figure indicates the location of the palm-rest and keyboard assembly and provides a visual representation of the removal
procedure.
90 Disassembly and reassembly
discrete or UMA (based on configuration).
drive.
drive.
after working inside your
before working inside your
or 4-cell).
SSD.
SSD.
battery.
reader.
computer.
computer.
or 4-cell battery configuration).