Connection Options; Power Management - Dell Vostro 5401 Service Manual

Connection options

Table 7. Connection
Option
Integrated NIC
Wireless Device Enable
Enable UEFI Network Stack

Power management

Table 8. Power Management
Option
Battery Configuration
Advanced Configuration
Peak Shift
Description
Allows the system to run on battery during peak power usage hours.
The options are:
● Adaptive—enabled by default
● Standard
● ExpressCharge
● Primarily AC Use
● Custom
NOTE: If Custom Charge is selected, you can also configure Custom Charge Start and
Custom Charge Stop.
This option enables you to maximize the battery health.
By default, the Enable Advanced Battery Charge Mode option is disabled.
NOTE: The user can charge battery using feature Beginning of Day and Work Period.
By default, Work Period is disabled.
Use ExpressCharge for accelerated battery charging.
Allows the system to run on battery during peak power usage hours.
Peak Shift - By default, this option is disabled.
Description
Integrated NIC controls the onboard LAN controller. It allows
pre-OS and early operating system networking features to use
any enabled NICs when UEFI networking protocols are
installed and available.
The options are:
● Disabled
● Enabled
● Enabled with PXE - This option is enabled by default.
Allows you to enable or disable the internal wireless devices.
The options are:
● WLAN
● Bluetooth
Both the options are enabled by default.
Allows you to control the onboard LAN controller. It allows
pre-OS and early operating system networking features to use
any enabled NICs when UEFI networking protocols are
installed and available.
Enable UEFI Network Stack - This option is enabled by
default.
System setup 101