8. Place the mylar cover back.
Next steps
1. Install the
coin-cell
battery.
2. Install the
system
fan.
3. Install the battery.
4. Install the
base
cover.
5. Follow the procedure in
Power button with fingerprint reader (optional)
Removing the power button and optional fingerprint reader - UMA
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
battery
.
4. Remove the
system
fan.
5. Remove
theM.2 2280 SSD
6. Remove the
I/O
board.
7. Remove the
coin-cell
About this task
The figure indicates the location of the power button with optional fingerprint reader and provides a visual representation of the
removal procedure.
Steps
1. Unplug the fingerprint reader cable from the connector on the palm-rest and keyboard assembly.
2. Lift the latch, and unplug the I/O cable from the connector on the palm-rest and keyboard assembly.
3. Remove the I/O cable from the palm-rest and keyboard assembly.
60
Disassembly and reassembly
after working inside your
before working inside your
or
M.2 2230
SSD.
battery.
computer.
computer.