Storage; Display; Connection Options - Dell Precision 7550 Setup And Specifications Manual

Storage

Table 31. Storage options
Option
SATA Operation
Storage Interface
SMART Reporting
Drive Information

Display

Table 32. Display options
Option
Display Brightness
Full Screen Logo

Connection options

Table 33. Connection
Option
Integrated NIC
Description
Allows you to configure the operating mode of the integrated SATA
hard drive controller.
The options are:
• Disabled
• AHCI
• RAID On—By default, the RAID On option is enabled.
NOTE: SATA is configured to support RAID mode.
Allows you to enable or disable various drives on board.
The options are:
• M.2 PCIe SSD-1
• M.2 PCIe SSD-0
By default, all the options are enabled.
This field controls whether hard drive errors for integrated drives are
reported during system startup. This technology is part of the Self
Monitoring Analysis and Reporting Technology (SMART) specification.
By default, the Enable SMART Reporting option is disabled .
Provides information about drive type and device.
Description
Allows you to set the screen brightness when running on battery and
AC power.
The options are:
• Brightness on battery power - By default, set to 50.
• Brightness on AC power - By default, set to 100.
Displays full screen logo when the image matches screen resolution.
By default, all the option is disabled.
Description
Integrated NIC controls the onboard LAN controller. It allows pre-
OS and early operating system networking features to use any
enabled NICs when UEFI networking protocols are installed and
available.
The options are:
System setup 33