Supplied Components; Removing The Covers - Nibe FLM S45 Installer Manual

Supplied components

Trim valve (RN1)
Ø 15 mm
Condensation water hose
Ø 20 mm
LOCATION
The bag of supplied items is placed on top of FLM S45.
8 Chapter 2 | Delivery and handling
Non-return valve (RM1)
Ø 32 mm
2 x screws (T25) for in-
stalling FLM S45 on NIBE
heat pump

Removing the covers

FRONT COVER
Remove the service cover by pulling it straight out.
1.
SIDE COVERS
1. Undo the screws at the upper edge.
2. Lift the side hatches upwards and twist the cover
outwards slightly.
Assembly takes place in the reverse order.
3.
NIBE FLM S45