GREE
Step
6. Remove motor.
7. Replace and
install the motor.
8. Install the fan.
9. Install the water
tray.
Multi Variable Air Conditioners Indoor Unit
Motor and fan
Diagram
184
Operation Procedure
●Use a screwdriver to unscrew the 4
screws of motor. Then remove the
motor.
●Remove the motor from motor
support and then replace with a new
motor.
●Tighten the 4 screws of motor with
a screwdriver.
●Direct the hole of fan to the motor
shaft and then mount on the fan.
●Tighten the clamping band of
motor with a wrench.
●Direct the 4 corners of water tray to
the 4 corners of the unit and then
press them. Use a screwdriver to
tighten the screws in the 4 corners.
●Connect the power cord and water
pump wire.
●Place back the cover of electric
box and the clamp of power cord.
Then tighten the screws with a
screwdriver.