Gree GMV-ND07PLS/A-T(U) Service Manual page 183

GREE
Step
(5) Remove the
motor.
(6) Install a new
motor.
GMV-ND72PH/B-T(U) / GMV-ND96PH/B-T(U)
Step
(1) Remove the
line
connecting to
the motor.
(2) Disassemble
the seal plate
and cover
plate.
(3) Remove the
grille
(4) Remove the
centrifugal
fan.
Motor and fan
Precondition: The power supply has been disconnected.
Diagram
Motor and fan
Precondition: The power supply has been disconnected.
Diagram
Multi Variable Air Conditioners Indoor Unit








177
Operation Procedure
Remove the motor from the
support and remove the
centrifugal fan from the motor
axle. Then, remove the motor.
For motors that are
accompanied with supports,
the supports need removing as
well.
Assemble units based on the
reverse order of this procedure
and power on the units for test.
Operation Procedure
Use a screwdriver to unscrew
the electric box cover.
Remove from the master board
the line connecting to the
motor and remove the tie.
Use a screwdriver to unscrew
the seal plate and cover plate
and then remove them.
Use a screwdriver to unscrew
the cover plate component.
Use a screwdriver to unscrew
the front volute casing and
then remove the volute casing.