Gree GMV-ND07PLS/A-T(U) Service Manual page 171

GREE
Step
(6) Remove
the main
board.
(7) Remove
the
electrical
box.
(8) Remove
the
evaporator.
(9) Remove
motor's
pressing
plate.
(10) Remove
the motor
and fan.
(11) Install a
new motor.
Removal of Fan Motor
Remark: before removing, making sure power is disconnected.
Diagram
Multi Variable Air Conditioners Indoor Unit










165
Operation Procedure
Release the wiring terminals
connected to the main board.
Remove the main board.
Unscrew the screws fixing the
electrical box with a
screwdriver.
Remove the electrical box.
Use a screwdriver to unscrew
the screws fixing the press plate
of connection pipe on the back
of the unit and take off the press
plate.
Unscrew the screws of
evaporator with a screwdriver
and then remove the
evaporator.
Unscrew the fixing screws of the
pressing plate with a
screwdriver and then remove it.
Take off the motor and fan
directly.
Use a screwdriver to unscrew
the screws connecting the
motor and the fan.
Assemble units based on the
reverse order of this procedure
and power on the units for test.