Disposal; Warranty - Weller DSX 120 Manual

DSX 120
WARNING!
PK Elektronik Vertriebs GmbH, E-Mail: info@pkelektronik.com, Internet: www.pkelektronik.com
Risk of burns
The suction nozzle will become very hot during desoldering.
Touching the suction nozzle can cause burns.
The desoldering tool must be left, switched off, in the safety
rest (WDH 30) for at least 3 minutes until the suction nozzle
has cooled down.
6.1 Cleaning and emptying the glass tube
Use the Cleaning Set (T0058765773) to clean the glass tube.
The glass tube is cleaned without the suction nozzle.
6.2 XDS Suction Nozzles for desoldering iron
DSX 120
Refer to table of XDS Suction Nozzles for desoldering Iron DSX 120
at the end of these operating instructions and visit
www.weller-tools.com
6.3 Replacement parts and accessories for
DSX 120
Order no. Description
T0051319899 DSX 120 desoldering iron
T0051515299 WDH 30 safety rest
T0051384199 Metal wool for cleaning element for WDC 2
T0051312499 Service Set DSX
Cleaning Set WXDP/DSX 120
T0058765772
Tip Cleaner WXDP/DSX 120
T0058765773
Refer to the exploded-view diagram of the DSX 120 desoldering iron
at the end of these operating instructions and visit
www.weller-tools.com

7 Disposal

Dispose of replaced equipment parts, filters or old devices in
accordance with the rules and regulations applicable in your country.

8 Warranty

Claims by the buyer for physical defects are time-barred after a
period of one year from delivery to the buyer. This does not apply to
claims by the buyer for indemnification in accordance with §§ 478,
479 BGB (German Federal Law Gazette).
We shall only be liable for claims arising from a warranty furnished
by us if the quality or durability warranty has been furnished by use
in writing and using the term "Warranty".
7-8