Advertisement
4.
If you have a 5A model, install the casters on the cart using
the hardware provided.
5.
Lift the lower section of the cart high enough to accept the
gas spring, then rotate the gas spring upward until the male
portion fits into the female portion of the cart. Insert the bolt
and lightly tighten the lock nut against the mount. Do not
over tighten as this is a pivot point.
6.
Flip the cart over onto the wheels. Then carefully remove and
unpack the Teflon sheeted tray and replace it on the cart. Ad-
just the cart height using the quick release lever. (Use the
upper level for flat plastics and the lower level for bubble
forming)
UNLOCKED
Cart may be raised or lowered
to required height
Oven Setup
Cart height is now locked into
4
LOCKED
position
Hide quick links:
Advertisement
