Yamaha S90 Owner's Manual page 83

Basic Procedure
1 Press the [CARD] button to enter the Card mode.
(The indicator lights.)
2 Select the desired menu by using the [F1] - [F6]
buttons and execute each operation (Save, Load,
and so on).
3 Press any other mode button to exit from the Card
mode.
File/Folder selection
The illustrations and instructions below show you how
to select files and folders on the Memory Card within
the Card mode.
Move the cursor to the desired file or folder by using
the [INC/YES] and [DEC/NO] buttons or the data dial.
To return to the
next highest level,
press the [EXIT]
button.
Move the cursor to the desired file or folder by using
the [INC/YES] and [DEC/NO] buttons or the data dial.
n Make sure that the desired song file (the one to be
assigned to the Chain Step in the Sequence Play mode) is
contained in the appropriate folder (Current) selected in
the Card mode. Since the song file name is not indicated
in the S90 display, make sure to assign a properly
descriptive or appropriate name to the folder containing
the file. You can check through the folders and files using
the File Utility software. (Refer to the separate
Installation Guide.)
To go to the next
lowest level,
highlight the
desired folder
New Folder Creation
From the Save display (called up via the [F2] button)
and the Rename display (called up via the [F4] button),
you can create new folders. This function lets you
conveniently and easily organize the numerous
important data files you create on the S90.
You can create a new folder by pressing
the [F6] button and naming it.
File types that can be
handled by the S90
File types that can be saved from the S90
to a Memory Card
Display
Extension Explanation
All data in the S90's internal User Memory are treated
All .W4A
as a single file, and can be saved to a Memory Card.
All the User Voice data in the S90's internal User
All Voice .W4V Memory are treated as a single file, and can be saved
to a Memory Card.
Plugin All All the data in a Plug-in board are treated as a single
.W2B
Bulk1,2,3 file, and can be saved to a Memory Card.
Chain Chain data are treated as a single file, and can be
(Sequence .W4C saved as such. This data is used for playing back
chain) multiple songs in succession.
Voice Editor All the User Voice data can be treated as a single file
(Voice data and saved to a Memory Card. The saved file can be
.W4E
for Voice loaded to the Voice Editor software (included in the
Editor) CD-ROM) on your computer.
File types that can be loaded from a
Memory Card to the S90
Display Extension
Explanation
A file that is saved to a Memory Card as "All" type can
All .W4A
be loaded and restored to the S90.
A file that is saved to a Memory Card as "All Voice"
All Voice .W4V
type can be loaded and restored to the S90.
A specified voice in a file that is saved to a Memory
Voice .W4A/.W4V Card as "All" or "All Voice" type can be individually
selected and loaded to the S90.
A specified performance in a file that is saved to a
Performance .W4A Memory Card as "ALL" type can be individually
selected and loaded to the S90.
A file that is saved to a Memory Card as "Plugin All
Plugin All
.W2B Bulk 1, 2, 3" type can be loaded and restored to the
Bulk1,2,3
Plug-in board installed to the S90.
A file that is saved to a Memory Card from the MOTIF
Usr ARP .W2G as "Usr ARP" type can be loaded and restored to the
S90.
Chain
A file that is saved to a Memory Card as "Chain" type
(Sequence .W4C
can be loaded to the S90.
chain)
The Voice data edited via the included Voice Editor
Voice Editor .W4E
software on your computer can be loaded to the S90.
83
Using Memory Cards