Yamaha S90 Owner's Manual page 69

In the Performance mode:
The diagram below indicates the internal signal flow when the Vocal Harmony Plug-in Board (PLG100-VH) is
installed to slot 1.
Select the part to which the
Insertion effect is applied from
parts 1-4 and Plug-in parts 2-3.
The connection type depends
on the setting of the Voice
assigned to the selected part.
Tone Generator
block
Parts 1-4,
Plug-in parts 2-3
Select the part to which
the Plug-in Insertion
effect is applied from
parts 1-4, Plug-in parts
2-3 and A/D Input part.
n The Vocal Harmony Plug-in Board (PLG100-VH) can be installed only to slot 1. It cannot be installed to slot 2 or 3.
In the Sequence Play/Mixing mode:
The diagram below indicates the internal signal flow when the Vocal Harmony Plug-in Board (PLG100-VH) is
installed to slot 1 and the Multi part Plug-in Board (PLG-100XG) is installed to slot 3.
Tone Generator
block
Part 1~16
Part 17-32 *
(When the Multi-part Plug-
in board has been installed)
Plug-in Part 2
(When the Single part Plug-
in board has been installed)
Select the part to which the
Plug-in Insertion effect is
applied.
* Please note that the Insertion Effect, Insertion Effect (Plug-in), and the System Effects cannot be applied to parts 17~32
(using the Multi-part Plug-in board). The signal from parts 17~32 is directly sent to the Master Equalizer.
Insertion Effects
Send Level
1
2
Insertion Effect
(Plug-in)
PLG 100-VH
A/D
• External audio source
• Microphone sound
Select the part to which the
Insertion effect is applied. The
connection type depends on the
setting of the Voice assigned to
the selected part.
Insertion Effects
1
2
Insertion Effect
(Plug-in)
PLG100-VH
A/D
• External audio source
• Microphone sound
System Effects
Reverb
Chorus
Variation
Return Level
Master Equalizer
System Effects
Reverb
Chorus
Variation
Return Level
Send Level
Master Equalizer
Output
Output
69
Using Effects