Yamaha S90 Owner's Manual page 117

Messages
Please stop sequencer.
PLG100 not supported.
Plug-in 1 communication error.
Plug-in 2 communication error.
Plug-in 3 communication error.
Plug-in 1 type mismatch.
Plug-in 2 type mismatch.
Plug-in 3 type mismatch.
Read only file.
Receiving MIDI bulk.
System memory crashed.
This Performance uses User Voices.
Too many favorites.
Transmitting MIDI bulk.
Unknown file format.
Try this operation after stopping the sequencer.
The Plug-in All Bulk Save function does not apply to the PLG100 series boards.
The Plug-in board that has been installed to slot 1 does not work.
The Plug-in board that has been installed to slot 2 does not work.
The Plug-in board that has been installed to slot 3 does not work.
The User Voice created by using the Plug-in board previously installed to slot 1 (but now removed from
slot 1) has been selected.
The User Voice created by using the Plug-in board previously installed to slot 2 (but now removed from
slot 2) has been selected.
The User Voice created by using the Plug-in board previously installed to slot 3 (but now removed from
slot 3) has been selected.
You have attempted to delete, rename, or overwrite a read-only file.
The S90 is receiving MIDI bulk data.
Writing data to Flash ROM has failed because the power was turned off during the operation. User data
has been initialized automatically. Turn the power off, then turn the power on again.
The performance you have loaded includes User voice data. Check whether the voice you saved exists
at the appropriate USER voice bank.
You've attempted to assign more than 257 voices to the Favorite category.
The S90 is transmitting MIDI bulk data.
The file format type is not supported by the S90.
Information
117
Display Messages