NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the stand.
2. Remove the
back
cover.
3. Remove the
system-board
Procedure
1. Disconnect the fan cable from the system board and remove it from the routing guides.
2. Remove the three screws (M2x2.5) that secure the fan to the display-assembly base.
3. Lift and slide the fan from under the heat sink.
computer. After working inside your computer, follow the instructions in
shield.
Removing the fan
Removing the fan
31
After
53