Abc: Midi Abc Mode On/Off; Lowr: Lower Abc Zone Limit; Uppr: Upper Abc Zone Limit - Yamaha QR10 Owner's Manual

ABC: MIDI ABC Mode ON/OFF

Use the [–1] key to turn MIDI ABC off
(",F") or the [+1] key to turn it "on", as
required.

LOWr: Lower ABC Zone Limit

UPPr: Upper ABC Zone Limit

The "LOWr" and "UPPr" parameters set
the range of notes in which chords played
will be recognized by the QR10 ABC system.
"LOWr" specifies the lowest note, and
"UPPr" specifies the highest note in the
range. The maximum range is from "00" (the
MIDI note number representing C-2) to
"127" (the MIDI note number representing
G8).
When ABC is turned "on", chords played
within the specified ABC range will be
recognized by the ABC system and the
accompaniment chord will change accord-
ingly during pattern playback or song accompaniment track recording. Chords played within the specified range of an
external MIDI keyboard connected to the QR10 MIDI IN connector are recognized.
MIDI ABC will only function when an indicator block is showing next to "CHORD" on the
IMPORTANT
display.
DETAIL
The UPPr parameter can not be set to a lower number than the LOWr parameter. If you do set
the UPPr parameter lower than the LOWr setting, the LOWr number will automatically be set to the
same number as the UPPr number. The opposite is also true: i.e. the LOWr parameter cannot be set to
a higher number than the UPPr parameter.
When ABC is ON, the QR10 will not sound in the specified ABC zone.
DETAIL
9: MIDI Utilities (continued)
or
45