The Midi Split & Left Local Off Mode; Bulk Data Dump - Yamaha Clavinova CLP-153SG Owner's Manual

MIDI Functions
The MIDI Split & Left Local OFF Mode
In the MIDI split mode one section of the Clavinova keyboard is used to play a Clavinova voice in the normal
way, while the remaining section is used to play a second MIDI keyboard or tone generator such as the Yamaha
DOU-10 Disk Orchestra Unit. In this mode the right-hand section of the keyboard is used to play an internal
Clavinova voice, while the left-hand section of the keyboard plays the external keyboard or tone generator.
Playing the left-hand section of the keyboard produces no sound from the Clavinova. The "split point," or the
key that divides the left- and right-hand sections of the keyboard can be set at any desired key.
AUX IN
MIDI OUT L R
Clavinova
HARPSI-
PIANO CHORD ORGAN
SPLIT POINT
Left-hand section plays
Right-hand section plays a
a DOU-10 bass voice.
Clavinova piano voice.

Bulk Data Dump

RECORDER
PLAY REC
18
The MIDI split mode is useful if, for example, you want to play a piano
(Clavinova) voice with the right hand while playing a synthesizer bass line
OUT PUT
MIDI
or string section with the left hand.
R L IN
When the MIDI split mode is activated, notes played on the left-hand
DOU-10
section are transmitted via the Clavinova MIDI OUT connector on MIDI
channel 2. Notes played on the right-hand section are transmitted on the
(Set to receive on
"basic channel" (i.e. the channel set using the MIDI channel selection func-
MIDI channel 2)
tion described previously).
Z
Press the [ORGAN] voice selector while holding down the [MIDI/
TRANSPOSE] button. The ORGAN LED will flash.
MIDI/
X
TRANSPOSE
While still holding the [MIDI/TRANSPOSE] button, press the key on
the keyboard at which you want to set the split point. The ORGAN
LED will light continuously. The split-point becomes the first key of
the left-hand section.
C
Release the [MIDI/TRANSPOSE] button.
V
To return to the normal full-keyboard mode, hold the [MIDI/TRANS-
POSE] button and press the [ORGAN] voice selector, then release both
buttons.
NOTE
This function is used to transmit all data stored in the Recorder memory
to a MIDI data storage device such as the Yamaha DOU-10 Disk Orchestra
Unit, other sequence recorders, or MIDI compatible computers.
Z
MIDI/
Hold [MIDI/TRANSPOSE] and press the [PLAY] button. Transmis-
TRANSPOSE
sion will begin.
X
Release the buttons.
NOTE
• When the power is turned ON the default split point key — F # 2 — will be
automatically selected. If a new split point is selected it remains active
until the power is turned OFF or a different split point is selected.
• Bulk dump will not function when the metronome is on or when the re-
corder is in operation.