Adjusting The Volume Of The Tracks; Transposition - Yamaha QR10 Owner's Manual

Adjusting the Volume of the Tracks

The VOLUME function lets you individually adjust the volume of the MELODY, CHORD 1, CHORD 2, BASS, and
RHYTHM tracks to achieve the overall "balance" you prefer. This can be done either while playback is stopped, or during
playback so you can monitor the overall effect.
Engage the VOLUME Function
1
Press the [VOLUME] key (the number "0" key)
while holding the [SHIFT] key.
Select a Track
2
Press the track key corresponding to the track to
be adjusted.
Set the Volume
3
Use the [–1] and [+1] keys, or the number keys,
to set the volume of the selected track between "00"
(no sound) and "99" (maximum volume).
If you are adjusting the volume while playback is stopped, you can play the micro-keyboard to
HINT
hear the effect of volume changes.
Adjust the Remaining Tracks.
4
Select and adjust other tracks, as required.
Exit
5
Press the [EXIT] key when done.
Volume adjustments applied to the preset patterns are only temporary. The original default
DETAIL
settings will be automatically restored as soon as a different pattern or mode is selected.

Transposition

The TRANSPOSE function makes it possible to transpose the overall playback pitch of the QR10 up or down in semitone
increments over a range of two octaves (one up and one down). A transpose setting of "0" produces normal pitch. Transposi-
tion can be carried out while playback is stopped or during playback, so you can immediately hear the effect.
5: More Creative Control (continued)
or
Volume
21