Technical Data - Elis FLONET FH30 Series Project Design, Installation And Service Manual

ELIS PLZEŇ a. s.
8

TECHNICAL DATA

Basic information and parameters
Measurement principle
Minimum fluid conductivity
Measured flow velocity
range
Rated inner diameter of
connected piping
Flowmeter design version
Measuring and grounding
electrode materials
Measured fluid temperature
/ sensor lining material
Sensor design version
Grounding
Manufacturing materials
Surface finish
AC power supply
ELIS PLZEŇ a. s., Luční 425/15, 301 00 Plzeň, Czech Republic, phone.: +420 377 517 711, fax: +420 377 517 722 Es 90678K
Project design, installation and service manual
Electromagnetic flowmeter FLONET FH30xx
The Faraday induction law
10 μS/cm, 20 μS/cm for demineralised water
0.025 to 10 m/s
DN15 to DN1200
NPS ½" to 24"
Compact
Remote
Standard:
• Stainless steel 1.4571 (SR, HR, SPR)
• Hastelloy C276 (PTFE, E-CTFE)
Optional:
• Hastelloy C276
• Titanium
• Tantalum
• Platinum and rhodium
Flanges
E-CTFE
E-CTFE
Flanged DN15 to DN1200
Wafer DN25 to DN200
On flanges
With grounding rings
Grounding electrode (DN25 to DN1200 for PTFE, HR, SR)
Transmitter housing: pressure casting, Al alloy
Sensor connection box: pressure casting, Al alloy
Sensor: measuring tube – stainless steel 1.4301
Sensor flanges and casing: standard – carbon steel
Transmitter housing: powder paint
Sensor connection box: powder paint
Sensor flanges and casing: standard – polyurethane paint
All-stainless-steel sensor: shot blasting
95 to 250VAC, 45 to 65Hz, 3VA max.
Internal fuse: T 1.25 A/250 V, 5 x 20 mm
Temperature range
Lining
( C)
−20 to +80
SR
HR 0 to +80
SPR to
+5 +80
−20 to +110
PTFE
−20 to +110
−35 to +80
SR
HR 0 to +80
SPR +5 to +80
−35 to +150
PTFE
−35 to +120
(DN40 to DN1200 for SPR)
(DN300 to DN1200 for E-CTFE)
optional – stainless steel 1.4301
Page 44 of 72
Sensor size
DN25 to DN1200
DN25 to DN1200
DN40 to DN1200
DN15 to DN1200
DN300 to DN1200
DN25 to DN1200
DN25 to DN1200
DN40 to DN1200
DN15 to DN1200
DN300 to DN1200