GEM 533 Operating Instructions Manual page 31

12.4.5 ProcessData Input Descriptor
The ProcessData Input Descriptor parameter describes the data format of the process data. Thus the master receives inform-
ation about the process data without IODD.
Index Sub- Off- Access
Index set Rights
0x0E 0 0 RO
Description of parameter values
Index name
ProcessData Input
Descriptor
12.4.6 ProcessData Output Descriptor
The ProcessData Output Descriptor parameter describes the data format of the process data. Thus the master receives in-
formation about the process data without IODD.
Index Sub- Off- Access
Index set Rights
0x0F 0 0 RO
Description of parameter values
Index name
ProcessData Output
Descriptor
12.4.7 Vendor name
The manufacturer name can be read out in ASCII format with the Vendor name parameter.
Index Sub- Off- Access
Index set Rights
0x10 0 0 RO
12.4.8 Product name
The device name can be read out in ASCII format with the Product name parameter.
Index Sub- Off- Access
Index set Rights
0x12 0 0 RO
www.gemu-group.com
Length Index name
3 byte ProcessData Input
Descriptor
Parameter Values
0x00
0x03
0x01
Length Index name
3 byte ProcessData
Output Descriptor
Parameter Values
0x00
0x04
0x01
Length Index name
5 bytes Vendor name
Length Index name
14 bytes Product name
Parameter
Bit offset
Type length
Data type -> BoolT
Parameter
Bit offset
Type length
Data type -> BoolT
Parameter
StringT
Parameter
StringT
31 / 55
12 Specific data IO-Link (pin 6)
Type Values
ArrayT 0x00
0x03
0x01
Description
Type Values
ArrayT 0x00
0x04
0x01
Description
Type Values
"GEMUE"
Type Values
"eSyStep On/Off"
GEMÜ 533 eSyStep
OPEN / CLOSE (Code AE)