Table of Contents
Advertisement
Default Settings
Press
key until the BASE menu appears and press
"INT/OK" key.
Press
or
key to select the submenu DEFAULT and
press "INT/OK" key.
Enter the PIN (factory setting = 0000) and press "INT/OK" key.
'CONFIRM?' will display, press "INT/OK" key to confirm.
Deregister HS
If several handsets are registered on one base station, they can
deregister each other mutually. The last handset can not be
deregistered.
Press
key until the BASE menu appears and press
"INT/OK" key.
Press
or
key to select the submenu DEREGISTER
and press "INT/OK" key.
Enter the PIN (factory setting = 0000) and press "INT/OK" key.
If necessary, Use
press "INT/OK" key.
'CONFIRM?' will display, press "INT/OK" key to confirm.
Set Time
The time is a 24 hour clock.
Press
key until the SET TIME menu appears and press
"INT/OK" key.
Enter the time using 2 digits for the hour and 2 digits for the
minute and press "INT/OK" key.
Technical Specifications
Handset Operating Time:
Approx. 10 hours talk time
(average values*)
Approx. 100 hours standby
AC / DC Adapter
VD060035D
(for Base)
Input: 230V AC / 50 Hz 60mA
Output: 6V DC, 350mA
Single-phase
installations defined by the EN 60950
standard.
Caution: the network voltage is classified
as a hazard by the criteria of this
standard.
AC Adapter (for Handset
VA070020D
charger, Due pack only)
Input: 230V AC / 50 Hz
Output: 7V AC, 200mA
Single-phase
installations defined by the EN 60950
standard.
Caution: the network voltage is classified
as a hazard by the criteria of this
standard.
Telephone connection
Appliance designed for connection to an
analogue telephone line class TNV3
(telecommunications network voltage) as
defined by the EN 60950 standard.
Rechargeable Battery
GP60AAAHC, 1.2V / 600mAh / Ni-MH,
AAA x 2 or equivalent
Operating Temperature:
0 to 45
* For guidance only, depends on initial battery charge.
General Product Care
Simply wipe the base station with a damp cloth or an antistatic wipe.
Never use a dry cloth as this can cause static discharge.
Troubleshooting Guide
When you forget base PIN, following the procedure to reset the units.
ALL MEMORY AND SETTING WILL BE LOST.
Disconnect the line cord and AC power supply.
or
key to select the handset and
AC
excluding
AC
excluding
o
C
– 14 –
IT
IT
Advertisement
Table of Contents
