Changing The Pin; Technical Specifications - GE 21828 User Manual

Digital cordless telephone with dual mode caller id
Hide thumbs Also See for 21828:
Table of Contents

Advertisement

Press
or
key to select the required submenu and press
"INT/OK" key.
Press
or
key to select the required dialing mode and
press "INT/OK" key.
Note: This Flash Time / Dialing mode is used only when dialing
from handset. Use the Base switch when dialing from Base.

Changing the PIN

Press
key until the BASE menu appears and press
"INT/OK" key.
Press
or
key to select the required submenu and press
"INT/OK" key.
Enter old PIN (0000) and press "INT/OK" key.
Enter new PIN (e.g. 1111) and press "INT/OK" key.
Enter new PIN again (e.g. 1111) and press "INT/OK" key to
confirm.
Default Settings
Press
key until the BASE menu appears and press
"INT/OK" key.
Press
or
key to select the required submenu and press
"INT/OK" key.
Enter the PIN (factory setting = 0000) and press "INT/OK" key.
Press "INT/OK" key to confirm.
Deregister HS
If several handsets are registered on one base station, they can
deregister each other mutually. The last handset can not be
deregistered.
Press
key until the BASE menu appears and press
"INT/OK" key.
Press
or
key to select the required submenu and press
"INT/OK" key.
Enter the PIN (factory setting = 0000) and press "INT/OK" key.
If necessary, Use
press "INT/OK" key.
Press "INT/OK" key to confirm.

Technical Specifications

Handset Operating Time:
Approx. 10 hours talk time
(average values*)
Approx. 100 hours standby
AC / DC Adaptor
3515-0635-ADC
Input: 230V AC / 50 Hz
Output: 6V DC, 350mA
Single-phase
installations defined by the EN 60950
standard.
Caution: the network voltage is classified
as a hazard by the criteria of this
standard.
AC / AC Adaptor (for
3515-0720-AAC
Handset charging)
Input: 230V AC / 50 Hz
Output: 7V AC, 200mA
Single-phase
installations defined by the EN 60950
standard.
Caution: the network voltage is classified
as a hazard by the criteria of this
standard.
Telephone connection
Appliance designed for connection to an
analogue telephone line class TNV3
(telecommunications network voltage) as
defined by the EN 60950 standard.
Rechargeable Battery
GP60AAAHC, 1.2V / 600mAh / Ni-MH,
AAA x 2 or equivalent
Operating Temperature:
0 to 45
* For guidance only, depends on initial battery charge.
or
key to select the handset and
AC
excluding
AC
excluding
o
C
13
IT
IT

Advertisement

Table of Contents
loading

Table of Contents