Table of Contents
Advertisement
Teleconference
After have received an external call, it is possible to include a second
handset in the conversation (three way conference).
Press "INT/OK" key and enter the number of the corresponding
handset (e.g. 2) which will join the teleconference.
The external caller is kept on hold. As soon as the other handset
takes the call, example handset 1 can intercom with handset 2.
Only the initiating handset can start a 3 way conference, press
and hold "#" key 2 seconds.
By pressing
key, any of the handsets quit from the
teleconference and the other handset continues with the external
call.
Handset Speaker Phone
Press
key to activate or deactivate the handset speaker.
Changing the Receiver Volume
Press
or
key to change the receiver volume during a
call.
Paging the Handset
If a handset has been misplaced, it is possible to call all the handsets.
Short press
key on the base station. To stop the page call,
press any key on the handset and
Entering a Dialling Pause (P)
If the telephone is connected to a PABX system, it may be necessary
to insert a dialing pause. To do this, press
relevant digit in the pre-dial buffer, e.g. 0, for an external line (0P....).
A "P" appears in the display indicating a pause. The pause can also be
entered when programming numbers in the phone book.
Switching the Key Lock On/Off
Incoming calls can still be received when key locked.
Press and hold "#" key for 2 seconds to activate or deactivate
the key lock. The
Phone Book
The telephone can store up to 40 entries in the phone book with name
and call number. When the function is supported by the telephone
provider service and the caller, the handset displays the name of the
caller (when stored in the phone book).
Store Entries
Press
key until the PHONE BOOK menu appears and
press "INT/OK" key.
Press
or
key to select NEW ENTRY and press
"INT/OK" key.
Enter the number (max. 25 digits) and press "INT/OK" key
when finished.
Enter the name (max. 10 characters) and press "INT/OK" key
when finished.
'MEM FULL' appears stand for memory full.
You can also store the number from pre-dialling mode
During standby mode, dial the telephone number (delete any
incorrect entries by pressing "C/ " key) and press "INT/OK"
key.
Enter the name (max. 10 characters) and press "INT/OK" key
when finished.
'MEM FULL' appears stand for memory full.
Key assignment Overview
1
SPACE 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
Note: When enter a name to store an entry, the "*" key and "#" key
are not available.
List Entries / Edit Entries / Delete Entries
Press
key until the PHONE BOOK menu appears and
press "INT/OK" key.
key on the base station.
key after entering the
icon turns on or off.
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
0
0
*
*
#
#
– 10 –
Advertisement
Table of Contents
