Map Screen - Bosch Nyon Original Operating Instructions

English – 42
<Map Screen>
The navigation system draws on map material that is based on Open-
StreetMap (OSM).
Whenever you switch on Nyon, it will begin with a satellite search to enable it
to receive GPS signals. Once enough satellites have been found, the location
point will change color from gray to blue. In unfavorable weather conditions
or locations, the search for satellites may take a little longer. If no satellites
have been found after an extended period of time, Nyon will restart.
When searching for satellites for the first time, the process can take several
minutes.
In order to achieve the best possible positional accuracy, the first satellite
search should be carried out outdoors. Ideally, you should remain stationary
for a few minutes while this takes place, even if your position has already
been found.
Once Nyon has determined your location, this will be shown to you on the
map. To zoom in to a section of the map, place two fingers on the touch-
screen and spread them apart. To zoom out of a section of the map, place
two fingers on the touchscreen and bring them together. To move around
the map, simply place two fingers on the touchscreen and move them across
the map. To select a destination, press and hold a finger against a location
on the map.
Bosch eBike Systems 1 270 U20 Nen | (02.10.2020)