Table of Contents
Advertisement
Assembly Instructions / Power2 850-M
1 Introduction / 1.3 Symbols, definitions
Design variants
This document is valid for different design variants of low and high-pressure stages. There
may be sections and descriptions of components that are not relevant for a specific low or
high-pressure stage.
ABB Turbocharging Service Stations will be happy to provide information about questions
regarding a design variant (see "Contact Information" on our website www.abb.com/tur-
bocharging).
Accuracy of illustrations
The illustrations in this document are general in nature and intended for ease of understand-
ing. Differences in detail are therefore possible.
ABB Turbo Systems
ABB Turbo Systems Ltd is identified as ABB Turbo Systems in this document.
Official service stations of ABB Turbo Systems
Official service stations are identified in this document as ABB Turbocharging Service Sta-
tions. They are regularly audited and certified by ABB Turbo Systems. See "Contact Informa-
tion" on our website at www.abb.com/turbocharging.
Definition of pictograms
The following pictograms can occur in this document. These point out actions that must be
taken in accordance with the meaning of the relevant pictogram.
Pictogram Meaning
Tighten with specified torque
Tighten over specified tightening
angle
Hand-tight, tighten without tools
Oil
Apply screw locking paste (e.g.
Loctite)
Apply high-temperature grease
Apply other paste in accordance
with specifications
Table 1: Definition of pictograms
© Copyright 2019 ABB. All rights reserved.
Pictogram Meaning
Oil free, grease free and dry
Affix
Measure
Note
Visually inspect
See document
Dispose of in an environmentally
compatible, professional way and
in compliance with locally applic-
able regulations.
HZTL455311P0010_EN
Revision A
March 2019
Advertisement
Table of Contents
