Weight And Transportation Of The Low-Pressure And The High-Pressure Stages - ABB Power2 800-M Assembly Instructions Manual

Assembly Instructions / Power2 850-M
3 Weight and transportation of the low-pressure and the high-pressure
stages / ​
3 Weight and transportation of the low-
pressure and the high-pressure stages
Lifting gear with a sufficient load limit must be used for installing the low-pressure and
high-pressure stages. The following weight specifications apply to the heaviest variant pos-
sible. Depending on the specification, the weight specified on the rating plate may be lower
than the standard values specified here.
Fig. 3: Suspending the low-pressure and high-pressure stages
A Low-pressure stage
B High-pressure stage
Power2 Product
850 LP Low-pressure stage
850 HP High-pressure stage
Table 4: Weights of the low-pressure and high-pressure stages
© Copyright 2019 ABB. All rights reserved. HZTL455311P0010_EN
Weight [kg]
1900
700
Revision A March 2019