Yamaha Electone EL-100 Owner's Manual page 94

9) Checking the Remaining Memory
You can check the amount of memory available for additional recording
in a disk by pressing PAUSE button while holding down SHIFT button.
The amount of available memory will be displayed on the LED.
The maximum amount of memory is ca.700 for 2DD disks and ca.1400
for 2HD disks.
10) Pattern Disks
The M.D.R. also allows you to select rhythms from optional disks.
To load the patterns from a Pattern disk:
1
Insert the Pattern Disk into the disk slot under the Music Disk
Recorder.
The pattern number and name from the Pattern Disk appears.
2
Select the rhythm you want to use using the appropriate Data
Control buttons.
Jumps Jumps
back ahead
6
10 numbers 10 numbers
DATA CONTROL
Selects Selects
previous next
number number
3
Start the rhythm to check the pattern to be called up.
94
<PATTERN DISK>[SAVE]
01:Pop.R-1
Pattern Number Pattern Name
(LEAD)
PAUSE
REM.MEM.
NOTE:
Refer to the pattern list included in the Pattern Disk
for the information on each rhythm.
Save
DATA CONTROL
Selects Selects
previous next
number number
RECORD PLAY
(K.PERC.) (LEAD) (K.PERC.)
SHIFT