Selecting From The Panel; Reverb - Yamaha Electone EL-100 Owner's Manual

3

Selecting from the Panel

Reverb, Sustain and Tremolo/Chorus pages are called up by pressing the
respective panel buttons.

1 Reverb

Reverb adds an echo-like effect to the sound, giving the impression of a
performance in a large room or concert hall. Reverb effect can be applied to the
3
entire system or to each voice section (page 31) independently. Also, Reverb
can be applied to the rhythm and accompaniment independently.
Press one of the REVERB buttons, located to the left of the panel, to set the
Reverb effect. The following display appears.
REVERB page
DATA CONTROL
1
Type
-1
Determines the type of reverb effect: Room, Hall and Church. Each
type simulates a different acoustic environment; Room is the smallest
and Church the largest.
1
Length
-2
Determines the acoustic liveliness of the simulated room in the effect.
Higher settings make the room more reverberant.
Range: 0 - 6
1
Depth
-3
Fine adjustment of the depth of reverberation or the level of the
reflected sounds. Coarse reverb depth settings are made with the panel
REVERB buttons.
Range: 0 - 24
40
REVERB
MAX
MIN
<REVERB> TYPE:HALL
LENGTH:3 DEPTH:16
1
-2
1
-1
DATA CONTROL
1
-3
NOTE:
When this parameter or the panel
REVERB control is set to the minimum,
the settings in each voice condition page
(page 31) have no effect.