Yamaha Electone EL-100 Owner's Manual page 93

3
Insert the source disk into the disk slot.
The M.D.R. starts reading the data in the source disk.
"out 1" appears on the LED display.
4
Press the eject button to take out the source disk.
"In 2" appears on the LED display to urge you to insert the
destination disk.
5
Insert the destination disk.
The number "160" appears on the LED display and counting
down is initiated as the disk is being copied.
When finished, "End" will appear on the LED display for few
seconds.
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
RECORD PLAY
UPPER LOWER PEDAL CONTROL UPPER LOWER PEDAL CONTROL
SONG FROM TO
REPEAT SONG COPY
PAUSE STOP PLAY SONG SELECT
TEMPO
MUSIC DISK RECORDER
NOTE:
"Fort" or "bAd" may appear if an error occurs in
the middle of the operation. If this happens, please
retry formatting the destination disk and copying
disk.
Follow the M.D.R. direction to eject/insert the
disks during the operation. Do not eject/insert the
disks frivolously ignoring the M.D.R. direction.
Doing so can damage the disk and possibly the disk
drive.
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
6
SHIFT
SONG DEL.
RECORD CUSTOM PLAY
FORMAT
93