Yamaha Electone EL-100 Owner's Manual page 27

To select the "hidden" voices
(Upper Keyboard Voice 2, Lower Keyboard Voice 2 and Pedal Voice 2):
You can call up the "hidden" voices on the LCD display and select them.
This function allows you to layer the voices on each keyboard to make the
sound thicker.
The procedure is explained with the selection of Upper Keyboard Voice 2,
as an example.
1. Press one of the voice buttons in the Upper Keyboard Voice section
while holding down the VOICE DISPLAY button in the DISPLAY
SELECT section.
DISPLAY SELECT
VOICE EFFECT A.B.C.
DISPLAY SET M.O.C.
FOOT REGIST. PITCH TREMOLO
SW. SHIFT MIDI (FAST)
If, for example, you have selected the ORGAN voice, the following
display (Voice Menu) will appear:
DATA CONTROL
Organ1
PopOrgan1 Accordion
Notice that several different voice names are shown on this display.
These are variations of the basic organ category.
2. Press one of the Data Control buttons that corresponds to the voice you
wish to select. (Pop Organ 1, in this case)
DATA CONTROL
Organ1
PopOrgan1 Accordion
The first letter of the selected voice will start blinking. You have
selected Pop Organ 1 for the Upper Keyboard Voice 2.
UPPER KEYBOARD VOICE
STRINGS BRASS CLARI- SAXO- CHORUS
NET PHONE
ORGAN PIANO GUITAR VIBRA- COSMIC
PHONE
JazzOrgan1
JazzOrgan1
HARMO-
MAX
NICA
TUTTI
MIN
DATA CONTROL
NOTE:
In this case the lamp on/off status in the
Upper Keyboard Voice section will not be
affected since you are dealing with the
Upper Keyboard Voice 2.
DATA CONTROL
2
27