Yamaha Electone EL-100 Owner's Manual page 55

2
Press the Page buttons to select PAGE 2.
DATA CONTROL
ACC.VOL.: 0 "ON'OFF¤
ACC.REV.:24 TYPE:1
Rhythm Condition [PAGE 2]
DATA CONTROL
ACC.VOL.: 0 "ON'OFF¤
ACC.REV.:24 TYPE:1
1 ACCOMPANIMENT
Determines the volume of the Accompaniment.
Range: 0 - 24
2 On/Off
On/off switches of the Accompaniment function. Use the top right
Data Control buttons to turn on/off the Accompaniment function.
3 ACC. Reverb
Determines the amount of reverb applied to the Accompaniment.
When the panel REVERB control is set to the minimum, the setting
here will have no effect.
Range: 0 - 24
4 Type
Four types of accompaniment are available.
These settings provide various types of rhythmic and melodic
accompaniment, and generally become more complex according to
the type number.
3
Start the rhythm by pressing START button and play the Lower
keyboard.
An appropriate accompaniment pattern, suited to the current rhythm
and the chord played on the Lower keyboard, will be played
automatically.
DATA CONTROL
1 2
DATA CONTROL
3 4
PAGE
NOTE:
Even if the Accompaniment Type is
changed, the Intro/Ending and Fill In
patterns remain the same.
NOTE:
When the Electone is turned on, the
Accompaniment Volume is automatically
set to 0 (factory setting). Be sure to set the
Accompaniment Volume to the appropri-
ate value when using the Accompaniment
function.
4
55