Yamaha Electone EL-100 Owner's Manual page 99

3
Upper 1, 2, Lower 1, 2, Lead
-1
The Glide function can be applied to any or all of the voice sections
shown in the display. Select the desired voice section(s).
3
Time
-2
Determines the speed of the Glide function, or in other words, how
gradually the pitch returns when the Footswitch is released. Higher
settings produce slower pitch changes.
Range: 1-5
4 Tremolo
Selection of Footswitch control over Tremolo.
Pressing the Footswitch turns the Tremolo effect on and off (Chorus),
performing the same function as the TREMOLO (FAST) button in the
DISPLAY SELECT section. (If you want to use this function, the tremolo
settings must be set properly. See page 42 for more information.)
DATA CONTROL
<FOOT.SW>MODE:TREM.
NOTE:
When the Glide function is applied, the
Vibrato is not effective.
DATA CONTROL
7
99