Yamaha Clavinova CLP- 785 Owner's Manual page 82

Connections
2.
Press the [>] button to call up the network list.
For a network with a lock icon
password.
3.
Connect the instrument to the Network.
3-1.
Select the desired network, then press the [>] button.
The name of the selected network will be fully shown in the display,
letting you confirm this is the network you want to use.
3-2.
Press the [>] button.
• For a network without a lock icon:
Connecting starts.
• For a network with a lock icon:
You need to enter the proper password. For details on how to enter
characters, refer to the "Renaming files" on page 70. After entering the
password, press the [FUNCTION] button to finalize the setting. This
operation starts connecting automatically.
When connection is done successfully, "Completed" is shown in the
display, and returns to the "Select Network" display.
4.
Connect the smart device to the access point.
For instructions on the setup for the smart device, refer to the "Smart
Device Connection Manual" on the website (page 8).
 Automatic Setup by WPS
Please make sure to connect the USB wireless LAN adaptor (sold separately) to
the USB [TO DEVICE] terminal, otherwise the displays for setup will not be
shown.
If your access point supports WPS, you can easily connect the instrument to
access point by WPS, without making settings, such as password input, etc.
Press the WPS button on the USB wireless LAN adaptor more than 3 seconds,
and press the WPS button on your access point within two minutes.
When connection is done successfully, "Completed" is shown in the display,
and the Voice display will be shown.
Finally, connect the smart device to the access point. For instructions on the
setup for the smart device, refer to the "Smart Device Connection Manual" on
the website (page 8).
82
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
, you need to enter the proper
NOTE
If no signal from the access
point is received, the access
point cannot be listed. Also,
closed access points cannot
be listed.
NOTE
WPS setup is not available
while the instrument is in the
following modes or conditions:
• While a Song or a Demo
Song is playing back or
being paused temporarily, or
while the instrument is in the
Song Recording mode.
• When Wireless LAN mode is
set to "Accesspoint Mode" in
the "System" menu.