Yamaha Clavinova CLP- 785 Owner's Manual page 56

Recording Your Performance
4.
After you finish your performance, press the [REC]
(Record) button again to stop recording.
This operation exits from the Recording mode and calls up the display for
saving the recorded performance data.
5.
If you want to save the recorded performance, press the [>]
button to execute the Save operation while "Save" is
highlighted.
After the Save operation is completed, the display shows "Save
Completed" then returns to the Song display. The recorded Song will be
named "USERSONGxxx" (xxx: number) and saved in the "User"
category.
• If you are not satisfied with your performance and want to record
again, highlight "Retry" then press the [>] button. Try recording again
from step 3.
• If you do not want to save the recorded data, highlight "Cancel" then
press the [>] button.
6.
To hear the recorded performance, press the [PLAY/
PAUSE] button.
Data that can be recorded to MIDI Songs
Data for each Track
• Note data (your keyboard performance)
• Voice selection
• Pedal operations (Damper/Soft/Sostenuto)
• Reverb Depth
• Chorus Depth
• Effect Depth
• Sound brightness — "Brightness"
• Resonance effect setting — "HarmonicContent"
• Octave
• Volume setting for each Voice — "Volume"
• Pan for each Voice
• Detune
• Touch Sensitivity
• Grand Expression Modeling data
56
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
Data commonly for all
Tracks
• Scale
• Tempo
• Time Signature
• Reverb Type
• Chorus Type
• Effect Type
NOTICE
The recorded MIDI Song will be
lost if you change to another
Song or you turn the power off
without executing the Save
operation.
Renaming the recorded
Song
The recorded Songs are
named automatically, but you
can rename Songs as you like
(page 70).
NOTE
Refer to page 67 for how to
delete a Song.
NOTE
Parameter settings other than
Voice and Tempo, such as note
data, pedal (Damper/Soft/
Sostenuto) data, octave setting
and time signature, cannot be
changed after recording.