Yamaha Clavinova CLP- 785 Owner's Manual page 125

5-1.
Insert the plug of the pedal cord into the
pedal connector.
Insert the pedal cord
securely until the metal part
of the cord plug disappears
from view. Otherwise, the
pedal may not function properly.
5-2.
Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
5-3.
Use a vinyl tie to take up any slack in the
pedal cord.
5-4.
Connect one end of the power cord to the
AC adaptor.
5-5.
Insert the DC plug of the AC adaptor
into the DC IN jack.
6.
Set the adjuster.
Rotate the adjuster until it comes in firm contact
with the floor surface.
7.
Attach the headphone hanger.
Use the two thin screws (4 × 10 mm) to attach the
hanger as shown in the illustration.
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
Assembling the Clavinova
125