Yamaha Clavinova CLP- 785 Owner's Manual page 130

Assembling the Clavinova
9.
If desired, you can attach the AC
adaptor to the bottom of the unit by
using the adaptor holders.
For specific instructions, refer to the leaflet
enclosed with the adaptor holders.
CAUTION
To disassemble the unit, reverse the assembly sequence.
Failure to do so can result in damage to the instrument or
personal injury. In particular, if you lay down the main unit
without detaching the pedal box, the pedals will break.
130
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
AC adaptor
4 × 10 mm
thin screws
CLP-765GP Assembly
Remove all parts from the package and make sure
you have all of the items.
Main unit
To prevent damage to the connector panels located at the bottom of main
unit, make sure to place main unit on the Styrofoam pads. Also, make sure
that the pads do not touch the connector panels.
Connector panel
Legs
Cord holder
Power cord
AC adaptor
Headphone hanger
Adaptor holders
The power cord and AC adaptor may not be included, or may look different
from the illustration above, depending on your particular area. Please check
with your Yamaha dealer.
Pads
Pedal box
Bundled pedal cord inside.
The pedals are covered with
vinyl covers when shipped from
the factory. Before starting the
assembly, please make sure to
remove the cover from the
damper pedal.
6 × 40 mm fixing screws × 12
6 × 20 mm fixing screws × 4
4 × 10 mm thin screws × 2
4 × 10 mm thin screws × 4