Assembling The Clavinova - Yamaha Clavinova CLP- 785 Owner's Manual

Assembling the Clavinova

Assembly Precautions
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all
parts in the correct orientation. Please assemble the unit in
accordance with the sequence given below.
• (CLP-785, CLP-775, CLP-745, CLP-735) Assembly should be
carried out by at least two persons.
• (CLP-795GP, CLP-765GP) Assembly should be carried out
by at least four persons.
• Be sure to use only the included screws of the specified
sizes. Do not use any other screws. Use of incorrect screws
can cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of
the unit.
• To disassemble the unit, reverse the assembly sequence
given below. Failure to do so can result in damage to the
instrument or personal injury.
Have a Phillips-head (+) screwdriver of the
appropriate size ready.
Assembling the Clavinova
Reference page
CLP-785 page 116
CLP-775 page 120
CLP-745 page 123
CLP-735 page 123
CLP-795GP page 126
CLP-765GP page 130
After completing the assembly, please
check the following.
• Are there any parts left over?
Review the assembly procedure and correct any errors.
• Is the instrument clear of doors and other
movable fixtures?
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise
when you shake it?
Tighten all screws.
• Does the pedal box rattle or give way when you
step on the pedals?
Turn the adjuster so that it is set firmly against the floor.
• Are the pedal and power cords inserted
securely into the sockets?
Check the connection.
When Moving the Instrument
After Assembly
CAUTION
• When moving the instrument after assembly, always hold
the bottom of the main unit.
• Do not hold the key cover or top portion. Improper handling
can result in damage to the instrument or personal injury.
NOTICE
Rotate the adjuster under the pedal until it separates from the floor
surface. Contact with the adjuster can result in damage to the floor
surface.
785 775
Hold here.
Rotate the adjuster under the pedal
until it separates from the floor
surface.
785 775
Key cover
Do not hold here.
CAUTION
If the unit creaks or is otherwise unsteady when you play on the
keyboard, refer to the assembly diagrams and retighten all screws.
Transporting
If you move to another location, refer to the "Transporting" on
page 133.
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner's Manual
745 735 795GP 765GP
Do not hold here.
745 735 795GP 765GP
Top Position
Do not hold here.
115