Philips GoPure Power User Manual page 5

3 Installing the GoPure car air purifier
3.1 Press the "OPEN"
button, lift the top cover
and remove the filter's
plastic wrapping.



Note
m
• For your safety, do not
attempt to operate the
purifier manually while
driving.
• Please don't put
device on car
dashboard or airbag.
• The belt may not be
suitable to all car
models.
3.2 Installing and
connecting the console

Place the belt over the
device as shown, with
the furry surface facing
the device.

Connect the power
cable to the
device as shown.

Recommended
installation location is
on the rear headrest
or rear window sill.
0
Important
m
When using Phillips GoPure
car purifier,
• Keep using car ventilation at
low speed.
• Keep car windows closed.
5

It is recommended to
hide the wiring in the car
by following the route
illustrated in the above
diagram - through the
carpet - seat edge - rear
headrest.

Connect the power
adapter to a 12V outlet
in your car.
Note
m
Please note the following
troubleshooting
instructions:
E1: The device is not
connected to
power cable.
E2: The top cover of the
device is not
properly closed.